Shenzhen Haneste New Material co.,LTD
| Payment Terms | T/T |
| Packaging Details | 25KG/barrel |
| Application | temperature sensors, temperature controllers and electronics |
| mixing ratio | 5:1 |
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H |
| distortion temperature ℃ | 130-150 |
| low temperature resistant ℃ | -30 |
| storage period | 6 months (25℃) |
| Brand Name | Hanast |
| Model Number | HN-5508AB |
| Certification | ROHS SGS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Vulcanizing Transparent Electrical Clear Potting Epoxy Silicon Gel Shockproof
Heat Curing Silicone Epoxy Potting Compound Material For Encapsulation
Electronic Raw Silicone Material Low Viscosity Potting Compound Glue 2 Component
Two Component Epoxy Potting Compound Resin Thermal Conductive Clear Black Liquid
Product Specification
| Payment Terms | T/T | Packaging Details | 25KG/barrel |
| Application | temperature sensors, temperature controllers and electronics | mixing ratio | 5:1 |
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H | distortion temperature ℃ | 130-150 |
| low temperature resistant ℃ | -30 | storage period | 6 months (25℃) |
| Brand Name | Hanast | Model Number | HN-5508AB |
| Certification | ROHS SGS | Place of Origin | Guangdong, China |
| High Light | silicone high temperature potting compound ，bulk high temperature potting compound ，bulk liquid silicone Epoxy | ||
Black Epoxy Potting Compound 5: 1 Electronic Potting Ab Glue For Transformer Circuit Board Power Module High Hardness Two-Component Epoxy Potting Sealant Glue
Product Description:
HN-5508 epoxy resin at room temperature or low temperature, with low viscosity, long operation time, good fluidity, and easy penetration into the clearance of the product; no bubbles after curing, smooth surface, luster, high hardness; curing materials have good acid and alkali resistance, moisture-proof, moisture, and air aging; curing materials have excellent insulation, compressive resistance, and bonding strength. Any electronic or other products that require perfusion sealing, packaging protection, insulation, and moisture resistance can be used.
| uring | builder | Epoxy resin 5508 | Curing agent 5508 |
| pigment | Black / White et al | Ruburn / transparent surface | |
| A sticky epoxy resin water | r liquid specific | ||
| c gravity, g / cm3 | 1.4-1.5 | 1.05 | |
| Viscosity of 25℃ | 4,500—6,000cp s | 150—250cp storage | |
| e Period (25℃) | Six months | x months | |
|
processabili
| mixing ratio | A: B =5:1 (weight ratio) | |
| Available for a time of 25℃ | 2-3H (100g mix) | ||
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H | ||
| After curing | 2 Tensile strength of kg/cm | 16-18 | |
| 2 Compressive strength of kg/cm | 18-22 | ||
| Resistance to the voltage of kv/mm | 20-22 | ||
| Surface resistance ofΩ-cm | 14 1.2*10 | ||
| Volume resistance ofΩ-cm | 15 1.1*10 | ||
| contraction percentage% | 0.35-0.55 | ||
| Water absorption rate was 25℃ * 24H | <0.03% | ||
| The hardness of SHORE A | 85-95 |
| distortion temperature ℃ | 130-150 |
| low temperature resistant ℃ | -30 |
storage and transportation
1. Store in a cool and dry place with a storage period of 6 months (25℃).
2. Products beyond the storage period should be confirmed whether there are any abnormalities before being used.
3. Parts A and B of the colloid must be sealed and preserved, with careful leakage during transportation!
4. These kinds of products are non-dangerous goods and can be transported as general chemicals.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
5000000-10000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be... Shenzhen Hanast New Polymer Materials Co., Ltd. was founded in 2010 and focuses on the development of new silicone materials. It is a national high-tech enterprise integrating the development, production, sales and service of silicone products. With an operation area of 16000 ㎡, our company has be...
Get in touch with us
Leave a Message, we will call you back quickly!